Top 10 typical forklift crashes ， forklift procedure must focus on these issues ！.

Top 10 typical forklift crashes ， forklift procedure must focus on these issues ！.

Blog Article

Do not underestimate the forklift at the workplace. If the procedure is not good, there will certainly be serious accidents in minutes, and there are numerous mishaps including forklifts.

Instance 1: The forklift freight obstructed the driver's view, and the individual in front could not be found, causing a rolling mishap.
Situation 2: In order to maintain the equilibrium of the forklift when raising hefty products, the workers used their body weight as the counterweight, which virtually triggered casualties.
Case 3: The size of the forklift freight surpasses the allowable width of the route and hangs on the roadside shelf, which virtually creates an mishap.
Situation 4: Forklift is speeding up and rolls over during a turn.
Case 5: The forklift driver did not see the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift lifts the personnel unlawfully, the forklift vehicle driver does not use the seat belt, the forklift lifter drops and the driver is squashed when the forklift surrender.
Instance 7: The forklift motorist did not wear a seat belt and fell from the car when it surrendered and was crushed.
Forklift procedure need to take notice of these matters ：.

Start.
1. Before beginning, observe the surroundings, and after confirming that there are no challenges that impede the safety and security of driving, beep the horn first and afterwards begin.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale have to be secure prior to starting.
3. When the forklift begins with a load, the vehicle driver must first validate that the load is stable and reputable.
4. The begin needs to be slow and steady.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork expensive when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles in the sky. When the load is traveling, the fork must not be increased expensive, which will influence the security of the forklift. .
3. After unloading, the fork needs to be reduced to the regular driving position prior to driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal ought to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will certainly trigger the lorry to shed lateral security and tip over. .
5. When the forklift is downhill, it is purely prohibited to switch off the flame and slide, and it is restricted to brake suddenly while driving with loads unless there are unique scenarios.
6. When the forklift is running, it needs to comply with the website traffic rules in the factory and need to keep a certain security range from the lorry ahead. .
7. When the forklift is running, the lots has to remain in the most affordable position that does not prevent the driving, and the gantry must be effectively slanted back. The lots shall not be elevated other than when piling or packing. .
8. The height of the load need to not block the motorist's view. In unique circumstances, when the item influences the forward vision, drive at a low speed when reversing.
9. It is restricted to activate the ramp, nor to drive across the ramp. .
10. The risk-free driving speed of the forklift in the factory location is 5 km/h, and it needs to drive safely at a low rate when entering the production workshop location. .
11. When the forklift is raised, raised or driven, it is forbidden for personnel to depend on the fork to hold products and play a balancing duty. .
12. If troubles are discovered, they will be fixed and reported in a prompt fashion, and they will never run with health problems or hide them.

packing and unloading.
1. When fork-loading things, the distance in between both forks ought to be readjusted as required to make the tons of both forks balanced and not manipulated, and one side of the product ought to be against the rack. .
2. It is restricted to collaborate with a single fork or make use of a fork top or draw. In special situations, security warning signs have to be established to remind surrounding pedestrians. .
3. In the process of filling and discharging products, the forklift must be stopped with the brake. .
4. The speed of the automobile should be sluggish and stable. Take care not to roll the wheels on the dunnage, so as not to extend the rolled items and hurt individuals. .
5. When making use of a fork to fork the goods, the fork must be as deep as possible under the tons, and it ought to be kept in mind that the fork pointer should not touch various other products or things. The lots should be stabilized with marginal back tilt of the gantry so that the tons does not move in reverse. The pole can be slanted ahead slightly when the lots is lowered to enable simple positioning of Electric Forklift Truck for Warehouse the lots and extraction of the forks. .
6. It is prohibited to fork products at broadband and collide with hard items with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to stand around the fork, so as to avoid the collapse of the goods and hurt individuals. .
8. Overwhelming is forbidden, and it is forbidden to use forks to lift workers to take part in high-altitude operations to stay clear of high-altitude falling mishaps. .
9. It is not enabled to make use of the brake inertia to slip, place, round or roll items. .
10. It is not permitted to utilize forks to select, transform pallet discharge.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork impend. Before leaving the forklift, you have to dump the goods or reduced the fork structure.
2. Draw the emergency brake handle to dead or dispirit the hand brake switch.
3. The engine is turned off and the power is removed. (Except for unique circumstances, such as the motorist does not leave the lorry's view and does not surpass 1 min).
4. Eliminate the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be examined, and gas, lubricating oil and air conditioning water must be added.
2. Inspect the security performance of starting, running and braking.
3. Check whether the lights and horn signals are complete and effective.
4. During the procedure of the forklift, check whether the pressure and temperature are typical.
5. After the forklift is running, the exterior leak needs to also be examined and the seals should be replaced in time.

Forklift Safety Operation Specifications.
1. You must inspect prior to leaving the vehicle;.
2. When you come across a person before you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. Electric Forklift Truck for Warehouse The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo ought to be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be too sharp to prevent the tendency of " cost-free switching";.
6. Adding and down the incline needs to be slow-moving and uniform, and no turning on the incline is permitted.
7. Do not drive throughout the gradient. When the gradient is higher than 10%, the automobile needs to be driven in reverse when worsening;.
8. When the forklift personnel carry the goods and move forward, if they come across big or heavy goods and most likely to the motorist's line of vision, they ought to take the reversing workout
.
The "Eight Prohibitions" need to be adhered to in the operation.
1. Single fork operation is not allowed.
2. It is not allowed to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not allowed to make use of inertia force to get the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll items.
7. It is not enabled to bring people to work with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Parking is not permitted under the following conditions.
1. Curves, narrow roads, train crossings;.
2. Areas with a longitudinal incline greater than 5%.
3. When there is an obstacle on one side of the road, the contrary side of the area with the same size as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844